TEMPLATE SPECIFICATION SHEET
Chevron Glass has fully automated cutting lines with facilities for straight line and shaped cutting, which includes laser scanning of various shaped templates. The laser scanning function requires a specific type of template for its operation. The following specifications are intended to reduce any lost time due to an unacceptable template with the main consideration being that the quality of the template will largely affect the outcome of the finished product.
-
CAD or similar computerised drawings are acceptable and preferred to actual templates.
-
A template handling charge will apply in addition to other charges for all orders to template.
-
All templates must be of a sturdy material, such as timber, ply, coreflute, Perspex or metal.
-
Templates must be actual FULL SIZE with finished sizes marked on the face if possible.
-
Paper, glass or plastic templates will not be accepted.
-
All templates must have customer’s name and order number clearly marked, attached or followed up with a faxed or emailed order.
-
Templates for products with coated, mirror or patterned glass must clearly show the coated, mirror or smooth face.
-
Templates to be returned to the customer must be labelled accordingly.
-
Templates for toughened glass must clearly show where the Standards logo is to be located.
-
Templates for toughened glass must comply with Chevron Toughened Glass Specifications covering sizes, notches, holes etc. for toughened glass.
-
Templates with added or subtracted measurements will not be accepted.
-
Multi dimensional templates will not be accepted, i.e. one template must refer to one glass panel.
-
Broken or damaged templates may not be accepted.
-
Standard size radius corners (i.e. 10,15, 20, 25, 30, 35, 40, 45, 50, 55, 60 and 70mm) do not require a template.
-
Radius corners drawn on orders and faxed will not be accepted as a template.
-
Hole positions on templates must be clearly marked with a cross to identify centre point.
